Can the module take a reversed 24V for about 20 seconds? It appears to work with proper 24V input.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can the module take a reversed 24V for about 20 seconds? It appears to work with proper 24V input.
It is not recommended to apply 24V to Vout pins .on PTN78000W . It is recommend to add a blocking diode between the external 24V and V output see diagram below. Evaluate any external output capacitors on output bus for voltage ratings.
If there are any additional questions, my direct line is tguerin@ti.com
Tom