This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61221: TPS61221 drawing large current while not connecting to any load.

Part Number: TPS61221

Hi there,

I designed a PCB board for TPS61221 according to the datasheet.

It successfully delivery 3.3V at Vout.

The circuit is as below.

However, I found that while no load at the output. The I in (input current) is about 6 mA.

It does not match with the datasheet. In my case,

It would be around 10uA.

Please Could anyone please tell me why.

Best Regards