• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 1518 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM2731: How can i remove the over shooting on VOUT

Amaury LAINE
Prodigy 10 points
Part Number: LM2731

Hello everyone,

I would like to have some help about the booster LM2731. My voltage input is 3.3V and Vout 7 V. I have a minimal load of 0.01mA.

Here is the ripple on the output. I have around 200mV of over shooting on the output and i don't know why. To try this chip, i'm using a bread board and a breakout board. Do you know how i can remove this over shooting?

  • 0
    TI__Guru 73570 points
    The breadboard or the breakout board introduces large inductance to the output filter capacitors, and it will cause large ripple voltage when the converter switches. Please make a PCB to evaluate the switching performances.

    Thanks