What's the spec for quiescent current on this part? The datasheet seems to have completely omitted what seems to be a pretty critical spec.....
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Umm... well now I'm in an uncomfortable position. I had asked someone else this same question; and they directed me to Page 6 of the device datasheet, line item 1 suggesting 100nA was the answer I sought- the fact that it didn't have the qord quiescent in it was how I had missed that. The CTRL pin is defined as the 'enable' function; and from the block diagram I do see a series FET on each leg so it seems we 'could' shut the outputs off. Your post seemed to suggest that we couldn't though; hence my confusion.
The intended use case for the device would be a portable/wearable; so... is it really 6-8mA all the time as you say; or if I pull CTRL low will it shut down and be nice?