Hi, team.
We have troubled in TLV71713PDQN.
When input voltage is left about 0.4 V, it doesn't start.
EN is tied to VIN, Ioad is only 2 mA.
Unless input voltage is set to 0V once, it doesn't start. Why?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, team.
We have troubled in TLV71713PDQN.
When input voltage is left about 0.4 V, it doesn't start.
EN is tied to VIN, Ioad is only 2 mA.
Unless input voltage is set to 0V once, it doesn't start. Why?
Hi, Ryan.
1)
The load is resistive. This problem has caused no load.
2)
The problem that TLV71713 doesn't sometimes start occurred. That case's VIN is 3.3V from 0V.
The condition that a problem can be reproduced 100 % is to repeat 0.4Vin and 3.3Vin.
Is there a report of a similar phenomenon?
Best Regards,