TLV62150A: snubber on the LX node

Jia Jia Chowpaknam

Part Number: TLV62150A

Is there any design recommendation for a snubber on the LX node based on your validation for EMI?

0 Chris Glaser over 7 years ago

Hi Jia Jia,

A snubber is not generally needed for these low power devices. Here is an app note on snubber design: www.ti.com/.../slva255.pdf

Instead, a proper input cap is recommended, as explained here: training.ti.com/high-efficiency-low-emi-switched-mode-power-supply-design-introducing-new-technologies-0

Power management forum