WEBENCH® Tools/TPS61260: Design cannnot created with this device

K.Yaita

Part Number: TPS61260

Tool/software: WEBENCH® Design Tools

Hi Team,

My customer considers to use TPS61260 for the following application.
Vin=3.3V, Vout=4.0V, Iout(max)=0.1A

However it shows "Design cannnot created with this device" as the following.

http://www.ti.com/product/TPS61260?keyMatch=TPS61260&tisearch=Search-EN-Everything

I believe TPS61260 can be used under the condition above..
Could you support for the issue?

Best Regards,
Yaita / Japan disty

over 6 years ago

0 Youhao Xi over 6 years ago

TI__Guru 68595 points

Yaita-san,

Just let you know that the engineer supporting this part is currently on vacation. You may need to wait until early next week to get the answer.

Thanks,
Youhao

0 K.Yaita over 6 years ago in reply to Youhao Xi

Guru 29690 points

Hi Youhao-san,

Thank you for your kind reminding.
Okay, I will wait as you refered.

Best Regards,
Yaita

0 Jasper Li over 6 years ago in reply to K.Yaita

TI__Mastermind 46905 points

yes, the device can be used in this input/output condition. there should be problem in the model. we'll change it

Power management

Power management forum

WEBENCH® Tools/TPS61260: Design cannnot created with this device