• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 442 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCH010505S: Does DCH01X series or DCP02X series support Hot Swap?

Walsh
Intellectual 950 points
Part Number: DCH010505S

Hi,

Does DCH01X series or DCP02X  series support Hot Swap? or Can we have other isolated power module support hot swap?

Thanks,

Walsh

  • 0
    TI__Mastermind 38230 points

    DCH01 series does support hot swap as long as Vin is not greater than ^ V peak or 5.5V DC. It has minimum inrush current during hot swap.

    DCP02 series has higher inrush current during hot swap.   Its input power source during hot swap may be forced into current limiting, preventing the DCP02 from operating normally.

    Tom

    .