This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR16006: LV2862 No-load ripple problem

Part Number: LMR16006
Other Parts Discussed in Thread: LV2862,

Hi TI team,

          Our customer uses LV2862. Vin = 22V ,Vout = 11V.  At present, The measured ripple of no-load mode is greater than 30mV.  

I want to get a smaller no-load ripple below 10mV. How should it be designed?