This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMG34XX-BB-EVM: When using LMG34XX-BB-EVM , R9 burns out.

Part Number: LMG34XX-BB-EVM

I buy LMG3410 HB EVM  and LMG34XX-BB-EVM board, and use them together

I am using 3 phase power supply to supply DC power through 3 phase diode rectifier.

The PWM signal uses a BNC connector and supplies a 12V supply to the LMG34XX BB EVM board.
However, when the power is turned on, the R9 resistance of the LMG34XX BB EVM board burns out.
And when the power is turned on in that state, the 12V power supply current is severely affected by noise above a certain voltage.
I want to solve this problem. Help.