• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 63 subscribers
  • Views 304 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR70503: LMR70503 maximum operating current and efficiency at high temperatures

user4363119
Prodigy 10 points
Part Number: LMR70503

We have a design for optical modules  application,

we will use LMR70503 for power output.Vin is 3.3V,and Vout is -5V.

We need to know the maximum output current and efficiency at high temperatures.The high temperature is 80 degrees Celsius.

If the temperature is 130 degrees Celsius, is it working properly?

thanks!

  • 0
    TI__Guru 68375 points
    We don't have the characterization data of the efficiency at high temperature. It is also depends on your system heat sinking capability. The switch peak current limit is guaranteed above 270mA, which can be used to estimate your load current. You need to determine the inductor value then calculate the ripple current, and then from there to get the guaranteed max load current.

    It the temperature is 130C, it may work but the current limit may slight reduce because the datasheet spec limits are obtained over -40C and +125C.
  • 0
    TI__Guru*** 142580 points
    Hi User,

    Here is a power module reference design for optical modules with your same specs: www.ti.com/.../TIDA-01457

    It supports a higher current and is more efficient.