This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM36010: register reading for flash mode set up

Part Number: LM36010

Hi there:

I'd like to help customer to check several question.

1. If the flash mode set-up: 1.5A for 1.6sec, -> the actual flash timing: 1sec and need to re-boot than LED back on

To read the Flag register: (0x05): 0x05  what's the meaning about Bit 0/ Bit 2 become 1? 

2. If the Bit 3 =1 I thermal current scale-back (TSB) flag, does that meaning the circuit is OTP or OCP?

update the schematic as following