LP5907-Q1: Thermal Information Changed from Old to New Datasheet

[ LP5907-Q1 ] Thermal Information Changed from Old to New Datasheet

Hi,

When the LP5907-Q1 datasheet was updated from Revision B to Revision C(May 2018), thermal information was also changed.




Can you please elaborate how these numbers are changed?

I know, not only this device, the thermal information on each device has been updated occasionally.
My customer has confirmed the thermal performance by thermal simulation with old values before going to production, so once thermal values are changed, they might need to perform simulation again. Especially the automotive customer...It's helpful for me, if you can share the background of this changes.

Thanks,
Ken

<Similar Posts>:

LP5907: the X2SON package thermal performance
https://e2e.ti.com/support/power_management/linear_regulators/f/321/t/708239?tisearch=e2e-quicksearch&keymatch=LP5907%20thermal

LP5907: LP5907 - Thermal vs package in X2SON and DSBGA
https://e2e.ti.com/support/power_management/linear_regulators/f/321/t/663907?tisearch=e2e-quicksearch&keymatch=LP5907%20thermal