• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 336 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS23750: Layout Questions

Allan Fan
Expert 5730 points
Part Number: TPS23750

Team,

Could you please explain more about the layout guide from the datasheet "Spacing consistent with safety standards like IEC60950 must be observed between the 48-V input voltage rails and between the input and an isolated converter output" ? What is the spacing requirement exactly?

Thanks.

Allan

  • 0
    TI__Mastermind 40100 points
    Hi Allan,

    This is referring to maintaining isolation (physical spacing ) between the primary and secondary. As a rule of thumb, I like to do 20V/mil. Other engineers have their own 'rules' and it'll depend on the safety engineer to make that call. So for my example, for a isolated supply that is designed for 1000-2000V isolation, a 50-100 mil spacing can be used. So for some of EVMs you'll see 50-100 mil spacing between the primary and secondary components (usually visually distinguishable by looking at the primary and secondary the ground planes).

    Regards,
    Darwin