TPS59650: 5V Supply

Ramgopal Divakar

Part Number: TPS59650

I have used this part with gen 3 I7 ivy-bridge INTEL AV8063801149203 and was successful. For a new design, I need to use this DC-DC with a 5V source and not 12V source. Is this change trivial or hard? Do you have a reference design like this:

http://www.ti.com/tool/TIDA-00021

But that works from 5V, instead of 12V.

over 6 years ago

0 Weidong Zhu over 6 years ago

TI__Expert 5965 points

Hi,

The design with 12V input can be used for 5V input as well. Thanks.

Regards,
Weidong

0 Ramgopal Divakar over 6 years ago in reply to Weidong Zhu

Expert 1165 points

Thanks,
can you send me a recommended circuit? Your eval board is designed to accept 9 to 20

0 Weidong Zhu over 6 years ago in reply to Ramgopal Divakar

TI__Expert 5965 points

Hi, you can use the same circuit, but can use lower voltage power block. For example, change CSD87350 to CSD86360 for higher efficiency.

Regards,
Weidong

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

TPS59650: 5V Supply