This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54061: Isolated power supply using coupled inductor

Part Number: TPS54061
Other Parts Discussed in Thread: LM5160, LM5017


I am trying to make isolated power supply using tps54061 with coupled inductor.

Vin=24V, L=100uH,

vout1=5V(non isolated)


I am getting Both the output voltage but for vout2 ie (isolated o/p) output current is negligible.

Is this topology with this ic is correct if correct then what should i do to increase my out current capability in isolated output .