Other Parts Discussed in Thread: REF5020
customer has two board one hand each with two REF5025 on it.
following the schematic connection
with input at 3.5V, the output of the REF5025 is only 2.2V ~2.3V and not 2.5V (happens on all 4 REF5025)
on the same board, replace with ADR03, it can output 2.5V
also there are REF5020 on the same board, and it outputs 2.048V.
we're applying a board to check the REF5025 IC, but project timeline is short and would like to check if any comments or suggestions from the design team?