This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Other Parts Discussed in Thread: BQ34Z100-G1, , BQ78350-R1, BQ34110, EV2400

Hello TI support team.

I gotan issue with BQ-HI-Production software (ver. 2.0.4 Build3). In configuration tab there is only Bq34z100-G1 available, even though required .bqz containers are in config folder. [screens realated]. How can i configure BQ-HI-Production software to program BQ78350-R1?

Best Regards,
Aleh Halauko

  • hi Aleh,

    I wanted to let you know that your post has been assigned to one of our applications engineers. This week takes place our annual Battery Management Deep Dive event for which all our engineers are all hands on deck. He will be able to your post early next week, once this event is over.

    You can check out recordings of much of the material we present at

    Thank you for your understanding!

  • Hi Aleh,

    You are correct that the current version of the software posted to is specific for the BQ34z100-G1. There are different versions of the software available to support BQ78350-R1 and BQ34110. For some reason these were removed by mistake from the web site, so I have been working to get them re-released.

    I can get you the software this week. I sent you a private message to share it because it is too large to share on the forum. Sorry for the inconvenience. 

    Best regards,


  • Hello, Thank's a lot for response.
    I also have an additional question about BQ-HI-PRODUCTION software: Is it possible to configure different station to test/program different devices eg.: bq78350-R1 and bq34z100-G1 at the same time?
    Best regards,
  • Hi Aleh,

    No, I don't think this is possible with one piece of software. It may be possible to run two instances of the software (one for bq78350-R1 and one for bq34z100-G1) on the same PC with two different EV2x00 modules, but this has not been tested. One very important thing I should mention is that the bq78350-R1 BQ-HI-PRODUCTION can only work with the EV2300 at the moment. An updated version will be released that supports the EV2400, but it is not available yet.

    Best regards,