• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 62 subscribers
  • Views 479 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC28700EVM-068: Can UCC28700EVM-068 use for 12V to 5V/1A?

Betty Guo
Expert 7300 points
Part Number: UCC28700EVM-068
Other Parts Discussed in Thread: UCC28700, TPS54202

Hi team,

can I use UCC28700-EVM for 12V to 5V/1A ? I connect 12V DC after LC filter, but no output. Are there any thing need to be changed?

the EVM user guide not say any information about ULVO.

thank you!

  • 0
    TI__Guru 72325 points
    Hello Betty,

    The UCC28700 is designed for off line applications and has a VDD turnon of 21V and a turnoff of 8.1V for trickle charge startup. If you are goig to use this in an flyback applciation it will not work.

    I searched TIs reference designs and found a 6V to 20V Vin to a 5V 1A output that is 94% efficent. You can find it at the following link if you are interested. This reference design uses the TPS54202 power controller IC.
    www.ti.com/.../TIDA-00948

    Regards,

    Mike
  • 0 in reply to Mike O'
    TI__Expert 7300 points
    Hi Mike,

    thanks for your reply.
    We need isolated 5V/1A. TPS54202 is buck converter and can't used for flyback. do you have some recommendation about it?
    thank you.
  • 0 in reply to Betty Guo
    TI__Guru 72325 points
    Hello Betty,

    Are you shore you need a buck converter? You could do an isolated forwarded converter. However, at this power level an isolated flyback makes more sense.

    Regards,

    Mike