• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 183 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

REF5050: Bypass capacitor distance

Toshihiro Watanabe
Genius 10235 points
Part Number: REF5050

Hello,

The customer wants to know how much distance bypass capacitor can be apart from IC. Would you advice it?

Best regards,

Toshihiro Watanabe

  • 0
    TI__Mastermind 19370 points
    Hi Toshihiro,

    The REF5050 datasheet in section 12 specifies as close as possible.
    www.ti.com/.../ref5050.pdf

    While I there is no maximum distance away from the IC, it is best to have it close as possible. This is also dependent on how noisy the supply it. If The supply is "clean" then the distance can be a bit further away. If the supply is noisy, I would not put it more than several mm away.

    -Marcoo