• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 179 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS650250: Simulation model

Takeshi Sasaki
Expert 4480 points
Part Number: TPS650250
Other Parts Discussed in Thread: TINA-TI

Hi team,

Can TI provide any simulation model for TPS650250? The customer wants to simulate enabling, reset input/output, power good function, something like that. 

Best regards,

Takeshi Sasaki

  • 0
    TI__Mastermind 30260 points
    Sasaki-san,

    No, at this time no models exist for simulating the TPS650250 PMIC device. Models would be in the Tools & Software section of the Product Folder (www.ti.com/.../toolssoftware) in the Models section, but this section is empty for this device. It is not common for PMICs to have simulation models.

    What specific type of model do you need? In other words, what software environment will you be using to run your simulations?
    SPICE has many variations and you would need to specify which type of SPICE you would be using (HSPICE, PSPICE, TINA-TI, or other).
    IBIS models are more for data (signal chain) devices and are not common for power products.
    A few examples of less common model types are ADS, AMI, PSIM, and SIMPLIS.

    Either way, creating part models can take a significant amount of time before they are completed.

    Do you have some specific questions about enabling, reset input/output, or power good function that I can answer to help your customer?
  • 0 in reply to Brian Berner
    TI__Expert 4480 points

    Hi Brian,

    Thank you for your comments. If I will have any additional questions from the customer, I'll reach out to you. Thanks!

    Best regards,

    Takeshi Sasaki