• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC28084: Output Power

Darren Yang
Expert 2000 points
Part Number: UCC28084

Hi Sir

could you help check the UCC28084 can be design as Vin:24V, VOUT: 48V,isolated output 300W use Push-pull topology？tks！

  • 0
    TI__Expert 3095 points
    Hi Darren Yang,
    I am pretty confident it should be no problem to do that design.
    It will depend upon some of the specification detail, such as the range of input voltage, hold-up requirement, etc.
    You may need to use external drivers since 300W from 24V will require quite large MOSFETS.
    Thanks
    Joe Leisten