TPS62095: SS pin voltage

Dongbao Zhou

Part Number: TPS62095

Hi team,

Just want to check with you about the SS pin voltage after powering up? According to the datasheet, the typical SS voltage is 1.25V.

However, according to the customer's test, the SS pin voltage is 5V. Customer test 5 pcs board, the results are the same.

Thanks

Dongbao

over 6 years ago

0 Sabrina over 6 years ago

TI__Expert 8420 points

Hi Dongbao,
it looks like a systematic measurement error. Could you check, where exactly the customer measures the 5V. could you share the layout?
I can see there is a 5V input source on the schematic

Thanks
Sabrina

0 Dongbao Zhou over 6 years ago in reply to Sabrina

TI__Expert 4160 points

Hi Sabrina,

It's true that SS will follow Vin, i also checked in the EVM.

In the datasheet, it's not clear enough that SS follows Vin after the output is stable. 1.25V is not the supposed voltage after power up, 1.25V is just the point that the output voltage reached the set point.

Please make it more clear in the next version datasheet.

Dongbao

Power management

Power management forum

TPS62095: SS pin voltage