• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 63 subscribers
  • Views 230 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMZ13610: LMZ13610: Vout

Lei wang
Expert 1620 points
Part Number: LMZ13610

Hi Sir：
The Green is Vin 。 The Yellow is Vout. The power output When closed the Vin. The Vout should down to 0 V But  there's a period of time , it goes up. then down to 0V

  • 0
    TI__Guru 50120 points
    Hi Lei,

    Can you provide your schematic for me to review? Normally when you go below the input UVLO threshold the device will stop switching and Vout will slowly discharge to 0V through the output caps. In this case it looks like something is causing the device to momentarily switch on before it completely discharges.

    Regards,
    Jimmy
  • 0 in reply to Jimmy Hua
    TI__Guru 50120 points
    Hi Lei,

    Can I get an update on this? I'd like to take a look at your schematic to help troubleshoot the issue. What is your conditions(VIN,VOUT,IOUT)? I'd like to test this on a LMZ13610EVM for comparison.

    Regards,
    Jimmy
  • 0 in reply to Jimmy Hua
    TI__Guru 50120 points
    Hi Lei

    I haven’t heard back from you, I’m assuming you were able to resolve your issue. If not, just post a reply below (or create a new thread if the thread has locked due to time-out)

    Regards,
    Jimmy