• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 618 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Updating Bq27500 / Bq27510 firmware during production - Flashstream?

BQ27510: how to unlock in BQStudio

tony li61324
Intellectual 500 points
Part Number: BQ27510
Other Parts Discussed in Thread: , BQSTUDIO

hi Tier

I use TI‘s BQ27510EVM connect BQSutdio ，BQ27510-G3 locked，Please give suggestions.  

  • 0
    TI__Guru* 76230 points
    Hi Tony
    Ony the far right of bqstudio window, there is the command sub window that contains buttons. One of the buttons is the unseal while the other is the unseal full access. You need to click both to unseal the gauge. If you changed the password from the default, the default passwords would not work

    thanks
    Onyx