• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 294 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90240: Fusion Digital Power Designer v2.0

Scott Cabelli86
Prodigy 60 points
Part Number: UCD90240

Can we get Fusion Digital Power Designer software, version 2.0. The older version works better for our older designs. 

  • 0
    TI__Guru 60800 points

    Hello

    Would you mind sharing why the old version GUI is more prerfered?

    Which particular 2.x GUI versio do you need?

    Could you please contact you local TI representative?

    Regards

    Yihe

  • 0 in reply to yihe
    Prodigy 60 points

    We initially had issues with programming multiple boards, however, it turned out to be that we didnt use the "check all" box for the voltage rails. Once this was included, the latest version is working well. 

    Cancel the request. 

    Thanks for the help,

    Scott