Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3813-Q1: TPS3813-Q1:

Part Number: TPS3813-Q1

Hi, We are using the Watchdog Part TPS3813-Q1, and the WDT and WDR are connected to '0'V and per the specification the RESET shall go low when the WDI input does not refresh between 9.46msec and 200msec. However we are observing that min = 4msec and max=120msec.

Please let me know why the above behavior is observed and also please let me know is there any other parameters that need to be taken care.

In case my understanding is not correct please clarify me.