Hi,
We have used LM25085 in our design with these specs:
V_in: 24V ( 120W)
V_out: 9V
Current Draw: 5A
Please see attached WEBENCH Design Report.
The issue we are facing is that our board heats up a lot when we try to draw 5A current @ 9V. The temperatures at the inductor and the diode reach up to 85-90 deg C. I cannot share our schematics and layout in this public forum. Please let us know what you think is a probable cause.
Thanks,
Adeel M. LM25085MY_12V-24VIN_9VOUT_10A.PDF
