I would like ask a few questions about NATURAL PFC LED LIGHTING DRIVER CONTROLLER.
I need to drive 10-12 350mA power leds for a traffic light application so I want to know if this LED driver is good enough.
Firstly, I want a good Power factor over 95%, which is ensured according to datasheet.
Secondly, very low no load power consumption. I did not read anything about it in the datasheet so I would like to ask is if I can achieve it with this led driver.
Also, I need fast turn-on and turn-off times with quick load discharge because I am going use this circuit with a 0.5Hz blinker.
Thank you very much.