• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 200 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCP022415D: No load condition

Toshihiro Watanabe
Genius 10235 points
Part Number: DCP022415D

Hello,

I think DCP022415D can be used in no load condition but the output voltage will be increased because unregulated.

Approximately how much voltage increased we should expected from typ 15V?

Best regards,

Toshihiro Watanabe

  • 0
    TI__Guru 50120 points

    Hi Watanabe-san,

    10% pre-loading is required to meet load regulation for the DCP02X devices. As such it is recommended to have at least 10% load to ensure output voltage is not too high. 

    Please reference to this post which asks a similar question and Jason's reply to the poster.

    Regards,

    Jimmy