CSD19538Q3A: Pin 1 orientation in tape, and Tape and Reel Box dimension of CSD19538Q3A

Alex Wu1

Intellectual 360 points

Part Number: CSD19538Q3A

Hi Expert

Please help to provide the pin 1 orientation in tape, and Tape and Reel Box dimension of CSD19538Q3A. Thanks.

over 4 years ago

0 John Wallace1 over 4 years ago

TI__Mastermind 29525 points

Hi Alex,
Thank you for promoting TI FETs. This information can be found on page 10 of the CSD19538Q3A datasheet. The cavity in the tape is nominally 3.60mm x 3.60mm x 1.30mm.

0 Alex Wu1 over 4 years ago in reply to John Wallace1

Intellectual 360 points

Hi John

Thanks for your quickly reply, but still need you help to check pin 1 location and provide the "REEL DIMENSIONS" and "TAPE AND REEL BOX DIMENSIONS" information as below picture(capture from other device's datasheet). Thanks.

0 John Wallace1 over 4 years ago in reply to Alex Wu1

TI__Mastermind 29525 points

Hi Alex,
Yes, pin 1 is indicated by the dot. The reel and box dimensions are as follows:

Diameter : 330 MM
Width : 12.4 MM

Ship Box :
Descriptor : SHIP-BOX
Length : 340 MM
Width : 340 MM

Power management

Power management forum

CSD19538Q3A: Pin 1 orientation in tape, and Tape and Reel Box dimension of CSD19538Q3A