Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 65 subscribers
  • Views 172 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ500101: Power Sequence Requirements

Jake Salmi
Expert 7055 points
Part Number: BQ500101

Hi folks-

Are there any requirements for power sequence between VIN and VDD on BQ500101?  My reading of the absolute maximums table does not restrict the VIN =12V while VDD =0V during power on.   Am I correct?

Thanks much, 

Jake