• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 64 subscribers
  • Views 329 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ2961: bq2961

dileep chacko
Prodigy 60 points
Part Number: BQ2961
Other Parts Discussed in Thread: BQ2962

Hi

I would like to have overvoltage 3.8V and under voltage 2.3V, what is the full part number of the BQ2961 device. Its not mentioned in the datasheet.

Can you please advice on this subject.

Thanks and Regards

Dileep Chacko

  • 0
    TI__Guru* 76230 points
    Hi Dileep

    There is a bq2962. Does that not work for you?
    thanks
    Onyx
  • 0 in reply to Onyx Ahiakwo
    Prodigy 60 points
    Hi Onyx

    I got the part number from the datasheet BQ296103DSGR, but later I found that, overvoltage protection and under voltage protection as 4.5 and 2.5V respectively. I would like to have 3.85V as overvoltage protection and 2.1V as under voltage protection. My understanding is that in order to get this value I should request TI to make custom made. bq2962 also has the overvoltage protection and under voltage protection as 4.35V and 2.5V, I still need to order custom part from TI. Do I get any standard part which has overvoltage protection and under voltage protection 3.85V and 2.1V respectively. My application is for Lithium Ion battery (LFP). Can you please advice.


    Thanks and Regards

    Dileep Chacko
  • 0 in reply to dileep chacko
    TI__Guru* 76230 points
    Hi Dileep

    Unfortunately, the answer is no. A request has to come in for that.


    thanks
    Onyx