Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 252 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5115: Turn off the output

Jerry Hsueh
Expert 2730 points
Part Number: LM5115

Hi TI

LM5115 does not have enable pin, if I want to turn off the output due to protection requirements.            

Whether VCC power can only be turned off, or there are other ways?            

Thanks.

Jerry

  • 0
    TI__Genius 11040 points
    Hi Jerry,

    The controller will be turned off when the VCC voltage drops below 4.0V. This will happen when the voltage at VBIAS drops below approximately 4.25V.

    Please let me know if anything is still unclear or if you have any additional questions.

    Best Regards,
    Katelyn