• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 191 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3838: Power management forum

Shota Mago
Expert 6580 points
Part Number: TPS3838

Hi team,

My customer is supposed to employ TPS3838 and he provided a question.

What will happen when CT pin is floating?
Does it(CT pin floating) output RESET even if MR is NOT reset?

I look forward to hearing back from you.

Best regards,

Shota Mago

  • 0
    TI__Genius 9375 points
    Mago-san,

    We do not recommend you leave the CT pin floating on this device. The CT pin should be connected to either Vdd or GND depending on the delay you are trying to achieve. While RESET may still be output, the delay times are going to be fluctuating and this is not the correct mode operation of this device. Is there any reason they are leaving this pin floating?

    Thanks,
    Abhinav.