This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z100-G1: GPCRA0 and GPCRB error when using Lead Acid PowerSonic PS-1250 12V 5Ah battery

Part Number: BQ34Z100-G1
Other Parts Discussed in Thread: GPCRB, GPCCHEM

I get attached errors when submitting attached GPCRA and GPCRB files.

Battery is lead acid so using C/20 discharge rate. Could this be source of error? Any ideas?

https://www.power-sonic.com/wp-content/uploads/2018/12/PS-1250%20technical%20specifications_US.pdf

GPCRA Error

0
Warning: Voltage under load 2303 mV is higher than OCV 2137mV. Please check correctness of your chem ID.

GPCRB Error

Error: Computation was not successful, but the specific reason was not identified.
       Please check that all files are prepared according to the documentation.
       The support personnel have been informed

May13_GPCRB_803.zip

GPCRA_May13_LeadAcid_803-report.zip

GPCRA_May13_LeadAcid_803.zip