This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/LM5160A: LM5160A CCM mode setting problem

Part Number: LM5160A

Tool/software: WEBENCH® Design Tools


I have designed isolated power supply (+15V and -8V outputs) using LM5160A shown below, the primary output at terminal 3 of the transformer is 7.5V. The FPWM pin is connected to Vcc to get CCM mode, but the IC output is always in DCM mode. It would be great if someone could help me to solve this problem.