• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 361 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

REF2030: decoupling 5x ADS7057

Theo Meyer
Prodigy 85 points
Part Number: REF2030
Other Parts Discussed in Thread: ADS7057

Hi,

I plan to use 5 ADS7057 ADC simultaneously. I supply the AVDD rails using a REF2030 voltage reference with 20mA source current capability. The REF2030 maximum recommended output capacitor is 10uF. The ADS7057 datasheet recommend a 3.3uF decoupling capacitor on the AVDD rail. Is it fine if I put 1uF close to each ADC plus a 4.7uF on the output of the REF2030? Is there any better configuration? What is the recommended decoupling scheme?

Best regards,

Théo Meyer

  • 0
    TI__Genius 9375 points

    Hi Theo,

    The design scheme you are applying with using a 4.7uF on the REF2030 output and 5 1uF capacitors at the ADCs seems like the best solution for what you are trying to achieve and using common capacitor values. The additional recommendations I can make is make sure that you use low ESR ceramic caps to ensure a stable voltage.

    Thanks,

    Abhinav.