Other Parts Discussed in Thread: TPS2115A
Our design is INx USB 5V, INy Li-battery 3.8(typ)
May I know how to enter standby to see standby current 25uA ?
Many thanks !
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thanks for reaching out on E2E!
The standby current is specified as the leakage current that enters the input pin that isn't powering the device. For example, the leakage current entering IN2 when IN1 is powering the output of the device.
You can measure this value by connecting a power supply to the secondary rail and measuring the leakage current. If you're looking for a device with a lower leakage current, the TPS2215A could also work for this 5V application.
To find the latest information on Power Switches, visit www.ti.com/powerswitch
Please click "This resolved my issue" button if this post answers your question.