This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS563208: Higher Vout Condition

Part Number: TPS563208

Hi, Team,

We have questions for TPS563208. There is Vout > Vin condition on the customer board. Please refer the below blocks.

1. Is it ok to use TPS563208 in this condition?

2. Should they use discharge register? Or should they use a bypass diode?

Best Regards,
Satoshi Yone

  • Hi Yone-san,

    If configurationg at Vout>Vin condition and device is still switching, device may have risk to operate at boost condiiton and increase the input voltage to very high, depening on what's the detail customer configure the system.

    Discharge resistor or bypass diode at the output side could help. And it will be helpful to send us the customer's schematic for double confirm. You can send to

    Best Regards,

    Vincent Zhang