• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 323 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PTH12040W: PTH12040WAD, PTH08T210WAD, PTH08T240WAD, PTH08T220WAD - What is the tolerance on the pin length?

6022220
Prodigy 80 points
Part Number: PTH12040W

These are through hole devices. Your datasheets list the length as 0.14 (3,55). Could you tell me what the tolerance is?

  • 0
    TI__Guru 50120 points

    Hi,

    The tolerances are listed in the notes section of the mechanical data page. In this case the through-hole length is the following:

    • 0.140 is a 3 place decimal and subject to +/- 0.010 (+/- 0,25mm) tolerance.

    Regards,

    Jimmy