TPS2310: Hot swap controller

qwert trewq

Part Number: TPS2310
Other Parts Discussed in Thread: TPS2456

Hi,

I have been using TPS2310 (2-channel hot swap controller)in that one channel have 5.5v max and in another 15 v max.

now we changed the one supply rails from 12 v to 15v .

1.can we use the same part?

2.if not can you suggest some other part in TI with 2 channel that support both the this voltages (one with 5v and another channel with 15v rail).

0 Praveen GD over 6 years ago

Hi Qwert,

TPS2310 is not recommended to operate at 15V input.

Unfortunately we do not have controllers which can support 5V rail and 15V rail.

We do have controllers like TPS2456 which can support dual 15V rails but not a 5V rail and a 15V rail.

0 Praveen GD over 6 years ago in reply to Praveen GD

Hi Qwert,

Do you have any other questions ? If not, can we close this thread ?

Power management forum