• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 475 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD15571Q2: CSD15571Q2 RDS off

LUIS GUEVARA
Intellectual 620 points
Part Number: CSD15571Q2

Regarding the transistor (CSD15571Q2), what about RDS (OFF), how high is it?  Since we are using this device as switch we not only want that RDS ON be very low, but also RDS OFF to be very high, please provide the information you have about RDS OFF.

 *Vfloat controlling this transistor is a digital signal (Maximum 3.3V, 0V minimum.)  

  • 0
    TI__Mastermind 34340 points

    Hi Luis,

    Thanks for your interest in TI MOSFETs. We do not spec Rds(off) in the datasheet. However, we do spec leakage current, IDSS < 1uA with VGS = 0V, VDS = 20V and Tamb = 25C. Although, I found an error in the datasheet. It should be VDS = 16V. Using this specification, we can calculate Rds(off) = 16V/1uA = 16Mohm (minimum). IDSS increases with temperature of the FET. At 125C, the maximum IDSS measured during characterization is about 1.7mA. TI only tests IDSS at 25C in production and we cannot guarantee the max value at elevated temperature. However, you should be able to use this to size your resistor values appropriately.