TPS1H200A-Q1: TPS1H200A-Q1 Enable Viltage

Chun Youngsu

Part Number: TPS1H200A-Q1

Dear TI Team,

Can I find out what operation is performed when 1.2V is applied to the enable pin of the TPS1H200A-Q1?

High Level min 2V / low level max 0.8V It is specified in the data sheet , and I want to know what kind of symptom will occur when the voltage in the middle range is applied.

please check.

Thanks.

over 6 years ago

0 Cameron Phillips over 6 years ago

TI__Genius 12410 points

Hello,

The inputs into the device are schmitt triggered in that the input will always be read as a 1 or 0. However if you are not above VIH or below VIL we cannot say whether or not the part will be on. However it will either be on or off, there is not partial charge on the gate if that is what you are asking.

0 Chun Youngsu over 6 years ago in reply to Cameron Phillips

Expert 2485 points

Hi.

Thank you for your reply.

Power management

Power management forum

TPS1H200A-Q1: TPS1H200A-Q1 Enable Viltage