Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The input capacitance needed is dependent on the strength of the power supply. When the device switches from one input to another, there will be a sudden increase in current on one of the channels and additional inrush current depending on the output capacitor. 1uF of input capacitance will not cause any problems with the device, but the voltage supply may dip depending on how well it can handle transients.
