• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 187 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Hotswap IC question

Eric Chien
Prodigy 10 points


Dear TI,

Does TI have three power rail 12V,5V,3.3V integrated hot-swap IC? or more than three power rail with 3.3V AUX is better.

another requirement is with voltage and current monitor which use I2C/SMbus for programming.

  • 0
    TI__Guru 57737 points

    Hi Eric,

    Please refer to document below for selecting the right hotswap controller.

    We  have hotswap controllers with PMBus but are only single channel controllers. In case you do not require PMBus, we have Dual Channel Hotswap Controllers as you can see in page 12 of the above document.