This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2051C: MOSFET power switch blocks current

Part Number: TPS2051C
Other Parts Discussed in Thread: TPS25221


Does the following condition occur when the enable signal is disabled?
Doesn't it flow to the input side via the body diode of the FET?
The MOSFET power switch blocks current from OUT to IN

Are there other such devices?

  • Hi,

    If TPS2051C is disabled, the output current will not flow into input as the internal FET is back to back.

    I am not sure about your detail requirements. You can also have a look at TPS25221.

    For TI's policy, I will first click resolved button.

    If you have any other concern, contact me any time.

    If you think resolved, please help click 'Issue is solved button'.