This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24610EVM: BQ24610EVM MOS Q1 and Q2 are very hot

Part Number: BQ24610EVM


I use BQ24610EVM found :supply 12V DC,change the Charge current from 3A to 8A,the Voltage leave(PIN3 ---GND) is different ,and the MOS  Q1 and Q2 are very hot when  BQ24610EVM works at  the high Charge current condition,such as 8A. I want to know how to adjust the PIN3 voltage to make it lower to get the MOS  Q1 and Q2 fully  turn on.