TLV62080: Inductance value on webench

Isee

Part Number: TLV62080

hi, it seems that Wepench does not support change of inductor value for TLV62080? Is 1uH fixed? Does 2.2uH not possibly result in a lower ripple current? Regards, Andreas

over 4 years ago

0 Bjoern Goerner over 4 years ago

TI__Intellectual 1525 points

Hi Andreas,

this is an issue with Webench and will be fixed soon. 2.2µH is a valid inductor value for this device.

You can create a custom part with 2.2µH in the inductor selection menu and run your simulation with this inductance.

Power management

Power management forum

TLV62080: Inductance value on webench