This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24091: Connecting NTC to the TS pin and MCU

Part Number: BQ24091


Is it possible to connect an NTC to the TS pin and to the MCU at the same time?

In that way, I could use the NTC to detect when there is a problem when charging the battery and when the device is used I could monitor the temperature of the battery. When the device is used the BQ24091 is disconnected from the 5V.